In this thesis work a Geographical Information System (GIS) based methodology to identify locations suitable for the installation of Wave energy converters has been developed. Parameters of importance have been identified and a GIS-database has been set up, containing data about the marine environment. In a case study of the Swedish west coast the methodology has been applied, resulting in a number of maps showing possible areas. The results show that large areas are suitable for installation of Wave energy converters, from a technical and economical point of view. When consideration is taken to other interests in the area, such as navigation, fishing and environmental protection, the size of the suitable area diminishes considerably.

The aim of this research is to find out what environmental impact a wave power park has on the Swedish west coast by creating a consultation paper (?Samrådsunderlag?) for the Lysekilproject at Uppsala University. To highlight the complexity of the problem a system analytic approach was used and illustrated by a Causal Loop Diagram.The overall assessment of the Lysekilprojects wave power park at the Swedish west coast is that it will have a low impact on the environment. This is due to the relative small size of the wave power park and some technical solutions made with the environmental aspect in mind. Artificial reefs and a sanctuary for marine species are effects created by the wave power park and in the longer term the impact will give access to an untapped source of renewable energy, Wave energy.

The basis of the study lies with a newly patented gearbox by cardiologist and inventor Stig Lundbäck. Stig founded CorPower Ocean AB to further develop the gearbox to be used in a Wave energy device. The purpose of this project is to develop a concept of a lifting system with CorPower Oceans gearbox that is more energy efficient than a hydraulic lifting system. The goal is to use technology from CorPower Oceans gearbox inversely to perform heavy lifting as an alternative to hydraulics. The project is limited to applying the gearbox and gear rack on a forklift with a lifting capacity of ten tons.The main tool in this project will be the product development process Systems Engineering where only the most relevant parts will be used to develop a concept.

The division of Electricity at Uppsala University is developing a Wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The Wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a Wave energy converter of Seabased AB was developed.

Seabased Industry AB develops system for extracting electrical energy from ocean waves with a Wave energy Converter (WEC). The components is bought from subcontractors and then assembled into Wave energy converters, buoys and marine substations by Seabased. In the future Seabased will produce more of the components themselves to reduce costs and to have better control over tolerances. The production line will also include the painting of the WECs and substations, which is performed in a painting line.The purpose of this thesis work is to study what is required to build a painting line, regarding the types of stations, transporting types and the space needed. This will result in layouts for the painting line.To receive the necessary information about production theory and corrosion and surface treatment, literature concerning this area has been studied.

AimThe aim of the present study was to study possible evidence for shock wave therapy on pain and function in patients with plantar fasciitis.Questions1. Does shock wave therapy reduce pain in patients with plantar fasciitis?2. Does shock wave therapy improve function in patients with plantar fasciitis?MethodA systematic review of the literature was performed in the databases PubMed, EMBASE, Cochrane and Cinahl.

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

This report describes how wavefiles can be recorded with programs written in the C++ language . The report also describes how the recorded sound is handled before it can be analyzed. The report describes the different parts that make a wave file to a wave file and how Windows handle these files. There is always some silence or noise of unknown length that passes through the system before some interesting sound arrives. That silence or nose must not be recorded and therefore some function must be developed that can detect interesting sound or speech.

Energy is today a very common topic, not only in Sweden but in the whole Europe. In EU they have given out a directive 2002/91/EG about buildings energy use and throw this they have forced their members to show how much energy their buildings use. In Sweden has the gouvernment established a law (SFS 2006:985) about energy declaration for buildings which demands that the building owner needs to show how much their buildings energy consumption are. Important to know is that this law doesn´t applies for industrial buildings.The report will show what the new law about energy declaration for buildings and appurtenant directions will mean for Riksbyggen. Also energy calculations will be done to be able to compare Riksbyggen buildings with the new law and directions.

Electroretinography is an examination method where the function of the retina is objectively assessed. In 2002 the European College of Veterinary Ophthalmology (ECVO) published a proposition to a standard on how to perform ERG examinations, to facilitate comparison of results and to make it possible to repeat examinations. The purpose of this study was to validate parts of the canine ERG protocol suggested by the ECVO. Our principal aim was to study if there is any interference at the recommended stimulus intervals for dark-adapted rod- and combined rod-/cone responses. The results show that there is an effect on the a- and b-wave amplitudes when different stimulus intervals are employed. When all examined intervals are pooled, there is an increase in the median b-wave to each consecutive dim, white (rod) stimulus in a series of four.

Increased energy consumption in the world has created an increased supply of various fuels, especially fossil fuels. The Swedish government has set up various energy targets for 2020. To reach these goals it?s important to increase the energy efficiency in local buildings such as schools. This work illustrates the breakdown between energy supply and energy losses over the school.

Seen in many trends and studies, consumers of today feel a growing desire to experience the uniqueness in products and services. This is forcing companies be more innovative and creative in their marketing, in order to distinguish and differentiate themselves and their products/services. We believe that creating a top-to-bottom experience strategy is one way that a company can succeed in this.The purpose of this thesis is to analyze and clarify how a business can reinforce their product experience through a complete experience strategy. In order to demonstrate this we have made a case-study research for the New Wave Group, advising them on how they can place blown glass art at the heart of the town of Kosta.The authors have used qualitative methods and an abductive approach. Four interviews have been completed with executives from the New Wave Group, including the project manager, hotel manager, head of the Kosta Boda smeltery and head of guides and visitors at Kosta museum.

The purpose with this report is to examine how the implemented energy efficiency measures on Bokelundskolan in Växjö have had impact on the energy use. The measures which have been implemented are, new ventilation system, new heating system, optimized adjustment of the heating system, new windows with U-value 1.2 and lower window height, insulation under windows and in the crawl space. The school's energy use before and after rebuilding has been calculated with the calculation program, Vip-Energy 1.5.5.Calculations of energy use for the school with windows on U-value, 0.9 and 0.7 have also been done. The replacement of windows has been studied from a cost perspective. The conclusion is that the exchange of heat and ventilation system was the biggest contributor to reduced energy use on Bokelundskolan.

In today?s society there is an increasing demand for renewable energy sources such as sun and wind power. These sources are intermittent, and energy storage is therefore needed to ensure a constant power supply. This report compares pumped hydro energy storage (PHES), compressed air energy storage (CAES), flywheels, batteries, super magnetic energy storage (SMES) and hydrogen energy storage.The opportunities for further development are limited for PHES and CAES in comparison with the other technologies. Lithium-ion batteries and hydrogen energy storage are considered to have the most potential in the future.

Energy awareness is growing among the Swedish population and a one­?to­?two-family dwelling can save energy. The purpose of this paper is to design a tool that helps these home owners reduce their energy costs.The paper develops a model that gives them an indication of how much energy they can save. For the majority of homeowners, the next step in the quest to reduce theirs is most likely an energy audit. Therefore, information to help home owners to get a good energy audit performed is included in the model.A prototype running the operating system iOS is created and validated against existing models, as well as an energy audit. .